Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

In this guide the push button is replaced. If the button is no longer working or the button is sticky this is the guide for you.

Parts

No parts specified.

  1. Unscrew the seven screws located on the back of the device.
    • Unscrew the seven screws located on the back of the device.

  2. Slide the plastic the spudger along the edge of the device to separate the keyboard tray.
    • Slide the plastic the spudger along the edge of the device to separate the keyboard tray.

  3. Flip the device over and open it to lift the keyboard tray from the body of the device.
    • Flip the device over and open it to lift the keyboard tray from the body of the device.

  4. Use the Plastic Spudger to gently release the ribbon cable attached to the keyboard.
    • Use the Plastic Spudger to gently release the ribbon cable attached to the keyboard.

    • Place device to side.

  5. Unlock and remove the 3 ribbon cables along the top of the keyboard tray. Unlock and remove the 3 ribbon cables along the top of the keyboard tray. Unlock and remove the 3 ribbon cables along the top of the keyboard tray.
    • Unlock and remove the 3 ribbon cables along the top of the keyboard tray.

  6. Locate and unscrew the 3 silver screws.
    • Locate and unscrew the 3 silver screws.

  7. Gently wiggle and lift the Push Button board from the keyboard tray.
    • Gently wiggle and lift the Push Button board from the keyboard tray.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kirby Raines

Member since: 01/23/2018

627 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 18

All Time: 755