The Claw Top Cover Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

What you need

1. Step 1 Top Cover
  Place The Claw machine in the up-right position with the control knobs facing you.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Turn The Claw machine upside-down placing the top cover on the surface of your work area.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 3
  Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.
  
  It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Turn The Claw machine back to the upright position with controls facing you.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Remove the top cover of The Claw machine.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
7. Step 6
  Remove the ten 6 mm phillips #1 screws from the top flange.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
8. Step 7
  Lift the flange upward and off to the side of the machine.
  
  There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.
  
  Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 3 other contributors

Alain Pierre

Member since: 03/22/16

1,188 Reputation

9 Guides authored

Team

UMass Dartmouth, Team 4-8, Catania Spring 2016 Member of UMass Dartmouth, Team 4-8, Catania Spring 2016

UMASSD-CATANIA-S16S4G8

3 Members

108 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 13

All Time: 251