Testing a Dishwasher Inlet Valve - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.

Introduction

This guide shows you how to access the inlet valve of a dishwasher and test its functionality with an ohmmeter.

1. Step 1 Laying it down
  Lay the dishwasher on its side.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Unscrew and remove the panel located under the dishwasher.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 3
  Locate the solenoid valve and disconnect the water inlet hose.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Unclip the rear assembly.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Clean the solenoid valve filter.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
7. Step 6
  Test the solenoid valve with an ohmmeter.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
8. Step 7
  Reinstall the block and the solenoid valve.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024
9. Step 8
  Replace the plate and stand the device upright.
  Translate
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow the instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 1 other contributor

CLAIN malaume

Member since: 03/23/22

217 Reputation

1 Guide authored

0 Guide Comments

View Statistics:

Past 24 Hours: 6

Past 7 Days: 39

Past 30 Days: 117

All Time: 339