Image 1/1: Remove stylus, sd card (if you have one), and case adaptor from device.
  • Completely power down device.

  • Remove stylus, sd card (if you have one), and case adaptor from device.

  • Insert thin tool (I used a knife) into the seam around the edges of the device and gently pry back cover off. It is held on only by clips but will require carefulness to avoid damage.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Calvin Brice

Member since: 01/08/2017

1 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 40

All Time: 498