Introduction

This guide will help you replace your faulty volume knob. This guide should only be looked at after completing the Disassembly Guide.

Parts

No parts required.

Remove the screws that are holding the circuit board in place. Remove the screws that are holding the circuit board in place.
  • Remove the screws that are holding the circuit board in place.

Add Comment

Pull the circuit board out to reveal the inside of the display. Pull the circuit board out to reveal the inside of the display.
  • Pull the circuit board out to reveal the inside of the display.

Add Comment

Deck the Halls
With tools and Fix Kits
Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place.
  • Remove the screws and the black piece that are holding the volume control knob in place.

Add Comment

Pull the volume control knob from the outside and the white piece on the inside until they separate. Replace the volume knob with a new one to complete the repair.
  • Pull the volume control knob from the outside and the white piece on the inside until they separate.

  • Replace the volume knob with a new one to complete the repair.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order and follow the disassembly guide instructions in reverse order.

2 other people completed this guide.

Oliver Kunz

Member since: 09/26/2012

96 Reputation

1 Guide authored

Team

Cal Poly, Team 2-61, Propen Fall 2012 Member of Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 12

All Time: 3,144