Fix Your Stuff Community Store

Cleaning/Replacing The Stylus

Introduction

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

  1. Cleaning/Replacing The Stylus, Stylus: step 1, image 1 of 2 Cleaning/Replacing The Stylus, Stylus: step 1, image 2 of 2

    • Turn off record the player before making repairs.

    • Unplug the record player.

  2. Cleaning/Replacing The Stylus: step 2, image 1 of 2 Cleaning/Replacing The Stylus: step 2, image 2 of 2

    • Open the lid to access the turntable, arm, and stylus.

  4. Cleaning/Replacing The Stylus: step 3, image 1 of 1

    • Press down on the front of the red stylus and pull forward to remove it from the arm.

  5. Cleaning/Replacing The Stylus: step 4, image 1 of 1

    • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

Author

with 4 other contributors

Charles Lockner

Member since: 09/17/12

115 Reputation

2 Guides authored

Badges: 9

+6 more badges

Team

Cal Poly, Team 2-61, Propen Fall 2012 Member of Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Members

5 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 23

All Time: 2,143