Introduction

Removing a white unibody Macbook disk drive.

Remove the six Phillips head screws with J00 bit.
  • Remove the six Phillips head screws with J00 bit.

Add Comment

Then Unplug the battery using a ESD Safe prying tool.
  • Then Unplug the battery using a ESD Safe prying tool.

Add Comment

  • Once Battery is Unplugged Remove two Philips head screws using J00 Bit.

Add Comment

  • After removing the screws and plastic cover piece, remove the hard drive then unplug from Logic Board.

Add Comment

  • Locate the RAM Directly above the Hard Drive. Gently push the two snaps away from the RAM cards and gently pull the ram out. You Will do this step again to remove the Second card beneath the first.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Gyoyo

Member since: 12/09/2016

164 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 25

Past 30 Days: 122

All Time: 2,138