TI-Nspire Battery Replacement

Step 1 Battery

• Face the side of the calculator with the "Texas Instruments" logo towards you, with the logo upright.
• Slide the front cover down to remove it.
Step 2



• The calculator should be facing front with the screen on the top and the keypad on the bottom.
• Hold the long side of the calculator on the right or left and turn it 180 degrees so that the back of the calculator faces you.
• Make sure that the current side facing you is the back by checking that the side has a "reset" button.
Step 3
• Locate the area with a switch on the bottom half of the calculator. Make the sure the switch is on the left side of the switch area, which indicates that it is locked.
• Slide the switch until it moves from the left side of the button area all the way to the right side.
• Make sure to hear a click once you move the switch all the way to the right, which indicates the keypad is now removable.
Step 4
• Turn the calculator back to the front as you would normally use it.
Step 5
• Put your hand on the keypad, slide the keypad down about a half inch, and pull up to remove the keypad.
Step 6
• The batteries should be on the right and left side in the keypad area, with two on each side.
• Place the tip of your finger in between the batteries, and remove the batteries. Repeat this for the other side as well.
Step 7
• When reassembling your device, use four new batteries.

Author

with 3 other contributors

Clincy Cheung

Member since: 09/26/12

223 Reputation

1 Guide authored

Badges: 10

• 
• 
• 

+7 more badges

Team

Cal Poly, Team 7-52, Forte Fall 2012 Member of Cal Poly, Team 7-52, Forte Fall 2012

CPSU-FORTE-F12S7G52

5 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview