Introduction
Follow this guide to remove and replace the battery for the TI-30-XB.
The battery being replaced in the calculator is the CR2032 litium button battery.
What you need
-
-
-
Remove the 6 Phillips #0 screws on the back
-
Remove the back cover
Ask FixBot
-
-
-
Remove the 2 long Phillips #0 screws holding the battery
-
Eject the battery
-
-
-
-
Place the new battery onto the metal prod of the battery slot
-
Screw the 2 long Phillips #0 screws onto the battery cover
-
-
-
Put the back cover back on and screw the 6 Phillips #0 screws back onto the back cover
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
1 Guide Comment
if the calculator won't work after changing the battery, press the reset button.
