Skip to main content

TCA Yoke Calibration

    • If you have your Yoke plugged-in, then unplug it.

    • Set the switch at the back of the Yoke to PC position.

    • If you are using Xbox, you still need to set the switch to PC position.

    • Don't forget to switch it back to Xbox, once you have completed this guide.

    • Make sure that Roll and Pitch are at resting point.

    • Make sure the right mini-stick is at resting point.

    • Make sure that Throttles are in the middle

    • Throttles don't have to be in the exact middle.

  1. TCA Yoke Calibration, Press and hold the indicated buttons: step 4, image 1 of 1
    • Press and hold the buttons highlighted in the image

    • Connect the Yoke to USB port while holding the buttons.

    • Once the Xbox button starts flashing, release the buttons.

  2. TCA Yoke Calibration, Press XBOX button: step 6, image 1 of 1
    • Press on the Xbox button.

    • It should start flashing faster.

  3. TCA Yoke Calibration, Move the Yoke all the way to the right.: step 7, image 1 of 1
    • Move the Yoke to the right, until you reach maximum.

    • Return the Yoke to Center.

    • For better results, move it smoothly, without forcing.

  4. TCA Yoke Calibration, Move the Yoke all the way to the left.: step 8, image 1 of 1
    • Move the Yoke to the left, until you reach maximum.

    • Return the Yoke to Center.

    • For better results, move it smoothly, without forcing.

  5. TCA Yoke Calibration, Push the Yoke forward: step 9, image 1 of 1
    • Push the Yoke forward, until you reach maximum.

    • Return the Yoke to Center.

    • For better results, move it smoothly, without forcing.

    • Make sure to not accidentally move yoke Left or Right.

  6. TCA Yoke Calibration, Pull the Yoke backwards: step 10, image 1 of 1
    • Pull the Yoke towards yourself, until you reach maximum.

    • Return the Yoke to Center.

    • For better results, move it smoothly, without forcing.

  7. TCA Yoke Calibration, Move the mini-stick to the right: step 11, image 1 of 1
    • Move the mini-stick to the right, until you reach maximum.

    • Return the mini-stick to Center.

    • For better results, move it smoothly, without forcing.

  8. TCA Yoke Calibration, Move the mini-stick to the left.: step 12, image 1 of 1
    • Move the mini-stick to the left, until you reach maximum.

    • Return the mini-stick to Center.

    • For better results, move it smoothly, without forcing.

  9. TCA Yoke Calibration, Move the mini-stick up: step 13, image 1 of 1
    • Move the mini-stick up, until you reach maximum.

    • Return the mini-stick to Center.

    • For better results, move it smoothly, without forcing.

  10. TCA Yoke Calibration, Move mini-stick down: step 14, image 1 of 1
    • Move the mini-stick down, until you reach maximum.

    • Return the mini-stick to Center.

    • For better results, move it smoothly, without forcing.

  11. TCA Yoke Calibration, Move both Throttles down: step 15, image 1 of 1
    • Move both throttles down, until you reach maximum.

    • For better results, move it smoothly, without forcing.

  12. TCA Yoke Calibration, Move throttles up: step 16, image 1 of 1
    • Move both throttles up, until you reach maximum.

    • For better results, move it smoothly, without forcing.

  13. TCA Yoke Calibration, Press XBOX button: step 17, image 1 of 1
    • Press Xbox button to finish the calibration.

    • Xbox button should stop flashing.

    • Make sure that Yoke, Throttles and mini-sticks have been returned to neutral positions.

Finish Line

Formica Fusca

Member since: 08/01/24

2,595 Reputation

15 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 80

All Time: 914