Parts

No parts required.

Push the button on the back to release the lid. (Missing on this example device.)
  • Push the button on the back to release the lid. (Missing on this example device.)

    • In the photo on the device page it is red.

Add Comment

Deck the Halls
With tools and Fix Kits
Unscrew the dasher by holding it in the middle and turning clockwise. You will have to spin it quite a bit.
  • Unscrew the dasher by holding it in the middle and turning clockwise.

    • You will have to spin it quite a bit.

  • From here, you can now replace the dasher entirely.

    • Alternately, you can continue to step 3 to further disassemble the dasher components.

  • To reassemble the device, follow these instructions in reverse order.

Add Comment

To take the dasher apart, remove the three 5.5 mm Phillips #00 screws embedded in the plastic.  **The 3rd screw is behind the hand in the picture Carefully pull the two pieces apart.
  • To take the dasher apart, remove the three 5.5 mm Phillips #00 screws embedded in the plastic. **The 3rd screw is behind the hand in the picture

  • Carefully pull the two pieces apart.

  • When you've finished taking apart the dasher, you should have two parts that are shown in the second picture in this step.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thomas Falcon

Member since: 03/24/2015

107 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 6

All Time: 257