Introduction

The monitor has stuck buttons and will not move. In order to ensure its quality and increase functionality, we will need to take this object apart and clean or replace unable buttons.

Parts

No parts required.

Image 1/1:
  • Remove three 8mm Phillips screws.

Add Comment

Image 1/2: Image 2/2:
  • Remove four 3mm screws below the battery.

Add Comment

Image 1/1:
  • Detach the battery.

Add Comment

Image 1/1:
  • Remove broken side button used for volume.

Add Comment

Image 1/1:
  • To ensure full success, be sure to clean or replace the buttons.

Add Comment

Image 1/1:
  • Place the new button on top of the unit and place the top over as shown.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney

Member since: 06/01/2016

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 55