Introduction

If the seat gets dirty, or the fabric is damaged, this guide will show you how to take the seat out.

Parts

No parts required.

Remove the two silver 12.7 mm  #01 screws (1 on each side) holding the back of the seat to the frame. Remove the two silver 12.7 mm  #01 screws (1 on each side) holding the back of the seat to the frame.
  • Remove the two silver 12.7 mm #01 screws (1 on each side) holding the back of the seat to the frame.

Unscrew the four silver 12.7 mm #01 screws (2 on each side)  holding the fabric along the handlebars on both sides.
  • Unscrew the four silver 12.7 mm #01 screws (2 on each side) holding the fabric along the handlebars on both sides.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.
  • Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.

After checking that all screws are unattached, pull the seat off. After checking that all screws are unattached, pull the seat off.
  • After checking that all screws are unattached, pull the seat off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Pradeep Sangli

Member since: 09/29/2015

116 Reputation

1 Guide authored

Team

Cal Poly, Team 11-5, Forte Fall 2015 Member of Cal Poly, Team 11-5, Forte Fall 2015

CPSU-FORTE-F15S11G5

4 Members

3 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 20

All Time: 371