Image 1/1:
  • Step 1. Turn the camera on: Put the camera in any mode other than Auto, and turn off the flash. And turn off the LCD screen and press the DISP or DISPLAY button.

Add Comment

Image 1/1: '''''Step 3. Take a picture.'''''
  • Step 2. Move the camera to any mode: For many canon cameras this will be shutter priority mode, that will give you the longest exposure time without flash.

  • Step 3. Take a picture.

Add Comment

Image 1/1: '''Step 5. Repeat:''' Repeat procedure until the shutter becomes unstuck.
  • Step 4. Open battery door: After a few seconds open the battery door and then close it again. This will momentarily interupt power during the exposure time.

  • Step 5. Repeat: Repeat procedure until the shutter becomes unstuck.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Marina Bayardo

Member since: 10/22/2015

209 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 51

All Time: 516