Fix Your Stuff Community Store

SteelSeries Arctis Pro Headset Mute Button Cap Replacement

Introduction

If the mute button is stuck or has stopped working this is a replacement for the key cap on it.

Caution: Ensure hands are dry. Moisture could mess up the wiring. Be gentle and remove necessary pieces carefully to not break the device.

What you need

  1. SteelSeries Arctis Pro Headset Mute Button Cap Replacement, Headset Mute Button Cap: step 1, image 1 of 2 SteelSeries Arctis Pro Headset Mute Button Cap Replacement, Headset Mute Button Cap: step 1, image 2 of 2

    • Remove the ear cushion by pulling the edge up and towards yourself

    • Repeat this motion all the way around the ear cushion until it comes free

    Edit

  2. SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 2, image 1 of 2 SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 2, image 2 of 2

    • Use a Phillips #0 screwdriver to remove the 3 case screws.

    • Remove the driver assembly from the rest of the housing

    Edit

  4. SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 3, image 1 of 1

    • Use a Phillips #0 screwdriver to remove the three 5 mm screws.

    Edit

  5. SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 4, image 1 of 2 SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 4, image 2 of 2

    • Remove the circuit board by pushing the scroll wheel out of the board and pulling it from the other side.

    Edit

  6. SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 5, image 1 of 2 SteelSeries Arctis Pro Headset Mute Button Cap Replacement: step 5, image 2 of 2

    • Grab the keycap and pull outwards till it comes free

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 42

All Time: 842