Skullcandy Crusher Wireless Earpiece Speaker Replacement
Last updated on May 13, 2022
Views: 5K
View statistics:
- Past 24 Hours:
- 7
- Past 7 Days:
- 34
- Past 30 Days:
- 129
- All Time:
- 5,039
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓Use this guide to replace the earpiece speaker in a Skullcandy Crusher Wireless headphones. Replacement speakers can be bought online.
Follow this replacement guide if the earpiece speaker has stopped working and you've ruled out other sources of the problem (or maybe you just want to see the internal components of your Skullcandy Crusher Wireless). See our Troubleshooting page for more information on what could be causing the sound issues.
Also, for more information about soldering and desoldering, please use this guide.
What you need
Parts
-
×2Skullcandy Crusher Wireless Replacement Ear CushionAffiliate linkAvailable for sale on Amazon
https://www.skullcandy.com/crusher-wireless-replacement-ear-cushion
Tools
-
-
-
Take your headphones and hold them upside down for better control with your hands.
Ask FixBot
-
-
-
Grab the ear cushion firmly between your thumb and forefinger with a tight grip.
-
Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.
-
-
-
Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.
-
-
-
-
-
Remove three 12 mm Phillips #1 screws located underneath the left ear cushion.
-
-
-
Slide a plastic opening tool between the plastic frame and speaker assembly of the headphones.
-
Gently pry the speaker away from the frame of the headphones.
-
-
-
Inspect the USB port and ensure that it is connected correctly. If necessary, desolder the USB port and replace it with the new port.
-
-
-
-
-
-
Remove four 4 mm Phillips #1 screws that connect the motherboard with the plastic frame.
-
-
-
Remove three 4 mm Phillips #1 screws that connect the bass speaker to the plastic frame.
-
-
-
Move the motherboard away from the plastic frame.
-
Desolder two cables to replace the speaker and bass component.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team 1-33, Gurgel Spring 2022 Member of UMass Dartmouth, Team 1-33, Gurgel Spring 2022
UMASSD-GURGEL-S22S1G33
1 Member
72 Guides authored
