This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓Stanley Electric Stapler. Failure in the safety switch due to wear. The Stanley Stapler has a safety switch to detect when the stapler is resting on a surface and to activate its operation. This switch has a service life based on the number of operations. I have replaced the black switch that comes with the device with a blue one that has a higher number of operations.
-
-
-
The Stanley stapler has a safety switch to enable operation. Once the stapler is placed on the surface, the switch activates and enables the machine's operation. First, disassemble the machine and desolder the black switch as shown in the image. Important note: be careful with the placement and where the moving parts go.
-
-
-
To reassemble your device, follow these instructions in reverse order.