Introduction

Make sure you can explore the Xplod very well.

  1. Press down the release button on the bottom left corner of the face plate.
    • Press down the release button on the bottom left corner of the face plate.

    • Then remove the face plate carefully.

    • Use two fingers to create a small gap in the top of the faceplate, as indicated in the picture.

    • Insert the flat end of the Heavy-duty Spudger into the opening you created.

    • Slide it to the right carefully, until you feel the screen pop off.

    • Make sure you keep the face of the screen pointed down as you carefully lift off the freed black portion of the screen - as shown in the picture.

    • Gently grab the Front Motherboard - as indicated in the picture - and lift it from the rest of the screen.

    • To remove the LCD, please refer to the iFixit soldering guide.

    • Once the LCD screen is removed, you have unrestricted access to the front screen motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chao Chen

Member since: 10/04/2011

79 Reputation

5 Guides authored

Team

Cal Poly, Team 5-35, Amido Fall 2011 Member of Cal Poly, Team 5-35, Amido Fall 2011

CPSU-AMIDO-F11S5G35

4 Members

8 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 32

All Time: 4,699