Introduction
Removing this part is hard for the first time because the manufacturer used adhesive to keep it in place.
What you need
-
-
Use the plastic opening tool to pry the top plastic section off.
-
-
-
Use the plastic opening tool to pry the bottom plastic section off.
-
-
-
-
Remove the four 5mm screws.
-
Use the plastic opening tool to pry off the back.
-
-
-
Use the plastic opening tool to detach the ribbon running across the battery.
-
Use the plastic opening tool to detach the ribbon connecting the battery to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.