Introduction

This guide can be used to remove the internal cover to access other components of the phone.

Image 1/1:
  • Using the spudger, pry open the back cover by starting alongside the edge of the back cover.

Add Comment

Image 1/1:
  • Once the part of the back cover has been opened up. Slide the spudger to pry completely detach the cover from the phone.

Add Comment

Image 1/1:
  • Using the Phillips #00 Precision screwdriver, take out 8 silver screws (3.15mm) and 5 gold screws (3.9mm) for a total of all the screws attached to the flat plate. 3 of the gold screws are located at the top of the phone and the other 2 screws are located at the bottom of the phone.

Add Comment

Image 1/2: Image 2/2:
  • To remove the internal cover, use the plastic spudger tool and pry the cover from the phone as shown in the picture.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Christina Wojaczyk

Member since: 09/26/2014

1,301 Reputation

7 Guides authored

Team

USF Tampa, Team 13-3, Staggers Fall 2014 Member of USF Tampa, Team 13-3, Staggers Fall 2014

USFT-STAGGERS-F14S13G3

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 12

Past 30 Days: 28

All Time: 1,674