Introduction

If your battery does not hold charge, we will show you how to open the phone and replace the old battery.


Please SUBSCRIBE to my channel ツ

Video Overview

Image 1/3: Be careful, the Cover is plastic. Image 2/3: Use a small suction cup and plastic tools for separating the Rear panel. Image 3/3: Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one if your spare part has come without double sided adhesive tape.
  • Warm the Back Cover. You can use a hairdryer.

  • Be careful, the Cover is plastic.

  • Use a small suction cup and plastic tools for separating the Rear panel.

  • Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one if your spare part has come without double sided adhesive tape.

One battery

One camra lance back

Prince Kushwah - Reply

Image 1/3: The battery is stuck to the phone fame. Use the white tape to remove it. Image 2/3: Li-Polymer Battery, 2230 mAh Image 3/3: Part number: LIS1551ERPC
  • Disconnect the Battery Cable.

  • The battery is stuck to the phone fame. Use the white tape to remove it.

  • Li-Polymer Battery, 2230 mAh

  • Part number: LIS1551ERPC

  • Please SUBSCRIBE to my channel ツ

если первая разборка, отклеивается очень сложно и я бы советовал нагреть модуль до 70-76, на сепараторе. тогда аккумулятор отклеится легче. =)

Владимир Гусев - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

15 other people completed this guide.

ZFix

Member since: 12/09/2013

129,433 Reputation

366 Guides authored

Team

Master Techs Member of Master Techs

Community

264 Members

614 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 100

Past 30 Days: 401

All Time: 33,435