Introduction

Follow this guide to replace a cracked or broken screen on you Sony Walkman NWZ-E438.

Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
  • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

  • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

Add Comment

Use a small prying tool to carefully pry open the back of the device.
  • Use a small prying tool to carefully pry open the back of the device.

Add Comment

  • Pull up the 2 copper strips connecting the outside of the device to the inside of the device.

Add Comment

  • Using the small, plastic prying tool wedge it between the bottom of the frame and the outer frame.

  • Slowly circle the device, popping the outside of the frame off.

Add Comment

  • To remove the screen, use the fine point tweezers and lift up on the metal piece at the bottom of the frame.

Add Comment

  • To remove screen from metal backing, use fine point tweezers to go in between the screen and metal backing and slowly pull them apart.

Add Comment

  • The screen will be removed.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 138