1. Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

  2. Use a small prying tool to carefully pry open the back of the device.
    • Use a small prying tool to carefully pry open the back of the device.

    • Unscrew the 1 screws around the headphone jack using Phillips PH000 screwdriver.

    • Using the fine pointed tweezers, unplug the cords connecting the headphone jack to the chip.

    • Remove the headphone jack.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One Comment

hi there, i have mine apart but where do i get a spare one to refit, please help

lee manock - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 12

All Time: 325