Introduction
The disk drive replacement is intended to show a simple way to remove and replace a disk drive.
Note: Do not pull disk drive out with force, as it can damage disk drive panel.
What you need
-
-
Remove the 9mm Phillips #1 screw holding the disk drive in place.
-
Remove the 9mm screw near the memory stick.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team S6-G6, Peak Spring 2019 Member of UMass Dartmouth, Team S6-G6, Peak Spring 2019
UMASSD-PEAK-S19S6G6
3 Members
10 Guides authored
