Introduction

If your current battery is dead or no longer works, you will need to remove the battery. This is shown below in just a few simple steps.

Hazards

Keep out of reach of children and pets.

DO NOT attempt to teardown or repair your device under the influence of drugs or alcohol.

DO NOT ingest any parts of the system.

Use the correct tools as stated in the tools section.

DO NOT touch any gold connectors on interior or exterior of the system.

Make sure system is unplugged and turned off before performing any maintenance on the system.

Image 1/1: Unlock the battery by sliding the port-side latch to the 'unlock' position.
  • Set the computer display-side down.

  • Unlock the battery by sliding the port-side latch to the 'unlock' position.

Add Comment

Image 1/1:
  • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Ashley Brooks

Member since: 04/09/2010

219 Reputation

4 Guides authored

Team

Cal Poly, Team 25-89, Amido Spring 2010 Member of Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Members

52 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 8

All Time: 3,502