Parts

No parts required.

Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.
  • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

Add Comment

Deck the Halls
With tools and Fix Kits
Slide the back cover off by pushing it to the left, away from the side that held the screws.
  • Slide the back cover off by pushing it to the left, away from the side that held the screws.

  • Remove the cover.

Add Comment

This is what the device should look like once the back cover panel has been removed.
  • This is what the device should look like once the back cover panel has been removed.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Terrika Ngobili

Member since: 10/13/2014

797 Reputation

7 Guides authored

Team

Clemson, Team 1-4, Benson Fall 2014 Member of Clemson, Team 1-4, Benson Fall 2014

CLEM-BENSON-F14S1G4

4 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 139