Skip to main content

Introduction

Prerequisite guide of earpiece deconstruction. Necessary for most part replacements.

Parts

No parts specified.

  1. Locate the side designation on the headband-earpiece junction.
    • Locate the side designation on the headband-earpiece junction.

    • The battery is in the right earpiece.

    • The motherboard is in the left earpiece.

  2. Gently pull around the perimeter of the ear cushion until it comes off. Gently pull around the perimeter of the ear cushion until it comes off.
    • Gently pull around the perimeter of the ear cushion until it comes off.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup. Gently pull the outer ear rim off of the headset assembly.
    • Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.

    • Gently pull the outer ear rim off of the headset assembly.

    • Harsh removal may cause permanent damage to the speaker wires.

  5. Using tweezers, gently pry the red and black speaker wires from the attached socket.
    • Using tweezers, gently pry the red and black speaker wires from the attached socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris Echter

Member since: 01/29/2015

829 Reputation

4 Guides authored

Team

Clemson, Team 14-2, Shirley Spring 2015 Member of Clemson, Team 14-2, Shirley Spring 2015

CLEM-SHIRLEY-S15S14G2

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 101