Fix Your Stuff Community Store

Sony Mavica MVC-CD1000 Lens Replacement

Introduction

If your camera isn’t properly displaying images or if the images are distorted, your lens may be the source of the problem. It’s important to keep your camera lens clean so that the resulting images aren’t dirty or filled with junk. Refer to this guide if the camera’s lens is not working or there is a problem with it!

What you need

  1. Sony Mavica MVC-CD1000 Lens Replacement, Lens: step 1, image 1 of 2 Sony Mavica MVC-CD1000 Lens Replacement, Lens: step 1, image 2 of 2

    • Rotate the shell of the base in the anti-clockwise direction so that you can detach it from the lens.

    Edit

  2. Sony Mavica MVC-CD1000 Lens Replacement: step 2, image 1 of 1

    • The outer casing of the lens consists of two outer casings that are secured by an end cap that connects them.

    Edit

  4. Sony Mavica MVC-CD1000 Lens Replacement: step 3, image 1 of 2 Sony Mavica MVC-CD1000 Lens Replacement: step 3, image 2 of 2

    • Remove the front end cover from the lens.

    Edit

  5. Sony Mavica MVC-CD1000 Lens Replacement: step 4, image 1 of 3 Sony Mavica MVC-CD1000 Lens Replacement: step 4, image 2 of 3 Sony Mavica MVC-CD1000 Lens Replacement: step 4, image 3 of 3

    • Place the lens section horizontally on the workbench and pry open the top cover of the lens.

    Edit

  6. Sony Mavica MVC-CD1000 Lens Replacement: step 5, image 1 of 1

    • After removing the shell of lens replace the inside part as shown in the photo.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 126