Introduction

Following this guides shows you how to remove the cassette lid from the device. Removing the cassette lid allows you to install a new one and enables you to remove the mechanism deck

Parts

No parts required.

Image 1/3: Pushing the tab allows the hinge to be separated from the body of the device. Image 2/3: The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure. Image 3/3: The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure.
  • Using a spudger, apply pressure towards the back corner of the cassette compartment to the plastic tab directly behind the gold cone.

  • Pushing the tab allows the hinge to be separated from the body of the device.

  • The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure.

Add Comment

Image 1/2: The latch should be clear of the slot in the cassette lid. Image 2/2: Be careful not to bend the latch too far, as it may warp.
  • Next, use a plastic opening tool to pull the metal latch towards the speaker.

  • The latch should be clear of the slot in the cassette lid.

  • Be careful not to bend the latch too far, as it may warp.

Add Comment

Image 1/1:
  • Carefully lift the cassette lid, making sure the tab and latch are free from connection.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott

Member since: 01/21/2012

1 Reputation

1 Guide authored

Team

Cal Poly, Team 10-34, Amido Winter 2012 Member of Cal Poly, Team 10-34, Amido Winter 2012

CPSU-AMIDO-W12S10G34

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 733