Fix Your Stuff

Right to Repair

Store

Sony Handycam HDR­-CX220 Display Screen Replacement

Written By: Keven (and 3 other contributors)
  • Comments: 4
  • Favorites: 0
  • Completions: 4

Difficulty

Moderate

Steps

9

Time Required

30 - 40 minutes

Sections

3

Flags

0

Introduction

The replacement of the screen is needed if the image on the screen is not the desired image or if the screen is physically damaged.

  1. Push in the battery indicator.

    • Push in the battery indicator.

    Edit

  2. Slide the battery out of the slot.

    • Slide the battery out of the slot.

    • To put the battery back in, line up the battery's metal part with the camera's and slide it in.

    Edit

  3. Use the Phillips #0 screwdriver to remove the two 5mm screws. Use the Phillips #0 screwdriver to remove the two 5mm screws. Use the Phillips #0 screwdriver to remove the three 5mm screws.

    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the three 5mm screws.

    Edit

  5. Use the plastic opening tool to loosen the plastic case of the camcorder. Use the plastic opening tool to loosen the plastic case of the camcorder. Use the plastic opening tool to loosen the plastic case of the camcorder.

    • Use the plastic opening tool to loosen the plastic case of the camcorder.

    Edit

  6. Use your hands to remove the plastic case.

    • Use your hands to remove the plastic case.

    • Gently pull on the case not to damage anything internally.

    Edit

  7. Use the Phillips #0 screwdriver to remover the two (5mm) screws on the outer part and one (3mm) in the middle. In the second image, there is a second screw on the opposite side of the screen hinge. This screw is not shown, but must also be removed.

    • Use the Phillips #0 screwdriver to remover the two (5mm) screws on the outer part and one (3mm) in the middle.

    • In the second image, there is a second screw on the opposite side of the screen hinge. This screw is not shown, but must also be removed.

    Edit

  8. Use the plastic opening tool to remove the plastic case protecting the screen

    • Use the plastic opening tool to remove the plastic case protecting the screen

    • Pull it gently not to damage anything under the case

    Edit

  9. Use the Phillips #0 screwdriver to remove the 2 screws shown Use your hands to carefully unhook the screen from the highlighted hook

    • Use the Phillips #0 screwdriver to remove the 2 screws shown

    • Use your hands to carefully unhook the screen from the highlighted hook

    Edit

  10. Use your hands to carefully remove the tape After removing the tape, pull on the wire disconnecting it from the screen. After removing the tape, pull on the wire disconnecting it from the screen.

    • Use your hands to carefully remove the tape

    • After removing the tape, pull on the wire disconnecting it from the screen.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Author

with 3 other contributors

Keven

Member since: 03/11/2016

787 Reputation

6 Guides authored

Badges: 10

+7 more badges

Team

UMass Dartmouth, Team 8-5, Botvin Spring 2016 Member of UMass Dartmouth, Team 8-5, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G5

3 Members

12 Guides authored

3 Comments

Add a comment

How do you mount hdr cx220 lcd cable flat? can you help me?

Rafael Oliveira - Reply

gjhgvnvyh n hygfv

ANM WORLD - Reply

We have a camera 220. Whose dipstick display strip has deteriorated again. Where can I find this strip? Video is good information so that's why

ANM WORLD - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 1,678