Introduction

This guide will show you how to remove the Dark Grey case that allows you access to the Screens.

Parts

No parts required.

To remove the front cover, lift up the case with a fingernail in the small slot as shown.
  • To remove the front cover, lift up the case with a fingernail in the small slot as shown.

Add Comment

To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.
  • To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.

Add Comment

Pry up the dark grey case with your fingernail until all four snaps around the top are loose.
  • Pry up the dark grey case with your fingernail until all four snaps around the top are loose.

Add Comment

Lift up towards the bottom and slide the case off.
  • Lift up towards the bottom and slide the case off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Alex Serventi

Member since: 10/07/2010

50 Reputation

26 Guides authored

Team

Cal Poly, Team 5-15, Maness Fall 2010 Member of Cal Poly, Team 5-15, Maness Fall 2010

CPSU-MANESS-F10S5G15

4 Members

26 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,016