Sony Ericsson Xperia Play Touch Screen Glass Digitizer Replacement
Last updated on May 1, 2017
Views: 4.1K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 20
- Past 30 Days:
- 110
- All Time:
- 4,063
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 3 4
3 people have favorited (and subscribed to) this guide. Will you be next?
4 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓If you touchscreen / digitizer is broken or not working, with this manual we will show you how to replace it.
What you need
Tools
Video Overview
-
-
-
Remove the battery cover and the battery.
-
Unscrew the 7x black screws and 6x silver screws.
-
Remove the rear bezel.
Ask FixBot
-
-
-
after removing the 2x black philips screws, use a plastic tool to disconnect the main flex cable connector.
-
Disconnect the gaming keyboard flex cable.
-
-
-
Remove the 4x philips screws and the small black sticker on the corner.
-
Disconnect the touchscreen flex cable connector.
-
Disassemble the front bezel.
-
-
-
To separate the touchscreen from the base bezel use hot air and plastic tools.
-
-
-
To reassemble your device, follow these instructions in reverse order.
