What you need
-
-
The tools you will need for this step is the prying tool and the T6 Torx screwdriver.
Ask FixBot
-
-
-
-
You now have access to the fours screws that hold the front of the phone together. Remove the four screws.
-
-
-
Use your fingers to remove the screen and unplug the ribbon cable from the bottom right corner of the back of the screen.
-
-
-
Now you have access to the camera, which is the silver plate at the bottom of the phone. Remove the camera and replace with a new camera.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
Ohio State, Team 1-2, Garvin Spring 2016 Member of Ohio State, Team 1-2, Garvin Spring 2016
OSU-GARVIN-S16S1G2
3 Members
4 Guides authored
