Introduction

This guide provides instruction for installing a back case for the Sony Ericsson TM506 cell phone.

Image 1/3: Push down with your thumb until the battery cover comes off. Image 2/3: Push down with your thumb until the battery cover comes off. Image 3/3: Push down with your thumb until the battery cover comes off.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

Add Comment

Image 1/2: Image 2/2:
  • Remove the two rubber casings for the top two screws with a plastic opening tool.

Add Comment

Image 1/1:
  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Minnal

Member since: 07/09/2012

16 Reputation

1 Guide authored

Team

Cal Poly, Team 1-1, Regan SU 2012 Member of Cal Poly, Team 1-1, Regan SU 2012

CPSU-REGAN-SU12S1G1

2 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 428