1. Remove battery cover
    • Remove battery cover

      • Press down firmly with thumb and slide cover back

    Add Comment

  2. Remove 4 screws from battery chamber
    • Remove 4 screws from battery chamber

      • Red - Phillips 0 screwdriver

      • Blue - Torx 6 screwdriver

    Add Comment

    • Gently pry off back casing

      • Note: work shim or flathead screwdriver around entire seam before attempting to pull off casing. This will reduce the chance of cracking the casing.

    Add Comment

    • Remove casing to expose camera components

    Add Comment

    • Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam

    Add Comment

    • Remove front casing by gently lifting it from the phone

      • Be careful not to pull off any other delicate pieces

    Add Comment

    • Keypad should be easy to remove

      • Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

    Add Comment

    • Use tweezers to get a grip on the joystick

    • Pull off

      • Warning: the green film surrounding the joystick is fragile. Take care not to puncture or rip it.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Abby Evers

Member since: 10/04/2011

196 Reputation

6 Guides authored

Team

UW Stout, Team 1-6, Zhou Fall 2011 Member of UW Stout, Team 1-6, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G6

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

All Time: 5,896