Skip to main content

Introduction

This guide will show the user how to disassemble a Sony Ericsson J22Oi with the intent of removing and replacing the phone's keypad.

Tools

No tools specified.

Parts

No parts specified.

  1. Before disassembling the phone, make sure the phone is powered off.
    • Before disassembling the phone, make sure the phone is powered off.

  2. Flip to the back of the phone and locate the black button on the top of the phone.
    • Flip to the back of the phone and locate the black button on the top of the phone.

  3. Firmly hold down the black button on the top of the phone and gently snap off the back cover.
    • Firmly hold down the black button on the top of the phone and gently snap off the back cover.

  4. Remove the battery by wedging it out from the back.
    • Remove the battery by wedging it out from the back.

  5. Flip to the front of the phone and apply pressure to the front frame of the phone.  The frame should snap off easily.
    • Flip to the front of the phone and apply pressure to the front frame of the phone. The frame should snap off easily.

  6. Remove the keypad by gently pulling it from the front of the phone.
    • Remove the keypad by gently pulling it from the front of the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

James Au

Member since: 10/06/2012

10 Reputation

4 Guides authored

Team

Cal Poly, Team 6-36, Regan Fall 2012 Member of Cal Poly, Team 6-36, Regan Fall 2012

CPSU-REGAN-F12S6G36

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 275