Introduction

This is a step by step guide to uninstalling the front casing of the camera.

First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

Add Comment

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Add Comment

Using a spudger, carefully pry open the front casing.
  • Using a spudger, carefully pry open the front casing.

Add Comment

Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Member since: 03/09/2012

116 Reputation

7 Guides authored

Team

Clemson, Team 1-5, Benson Spring 2012 Member of Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 1,073