Introduction

This guide will walk you through how to replace the LCD screen of your Sony Cyber-shot DSC-P10 camera.

Parts

No parts required.

Remove the two screws on the top of the camera. Remove the two screws on the bottom of the camera. Remove the rear cover.
  • Remove the two screws on the top of the camera.

  • Remove the two screws on the bottom of the camera.

  • Remove the rear cover.

Add Comment

Black Friday
Broken doesn't stand a chance.
Peel the strip of black padding off of the screw. Remove the screw. Lift the right side of the screen up, then pull the screen to the right to free the LCD screen.
  • Peel the strip of black padding off of the screw.

  • Remove the screw.

  • Lift the right side of the screen up, then pull the screen to the right to free the LCD screen.

  • Carefully pull on the ribbon circuits to remove them.

  • You have successfully removed the LCD screen!!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adrian

Member since: 10/11/2011

22 Reputation

1 Guide authored

Team

UW Stout, Team 1-1, Zhou Fall 2011 Member of UW Stout, Team 1-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G1

5 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 12

All Time: 1,641