Sony Cyber-shot DSC-HX1 Button Assembly Replacement

Step 1 Battery

• Make sure the surface you place the screen on is clean of debris and dust. Otherwise you risk scratching your screen.
• Place the camera with the bottom facing you and the lens facing up.
Step 2

• Push down and away from the camera to the left on the indicated indentation in the battery cover. The compartment should slide open as shown.
Step 3
• Push the blue tab towards the camera body to the right, while simultaneously pulling out the battery.
• The battery is not shown here. However, normally the battery would be in the displayed compartment.
Step 4 Button Assembly
• On the top of the inside the battery compartment, remove the #00 6.0 mm Phillips screw.
Step 5
• Lift the button housing from its position on top of the camera.

Author

with 1 other contributor

Brianna Greenlaw

Member since: 04/06/15

1,181 Reputation

5 Guides authored

Badges: 16

• 
• 
• 

+13 more badges

Team

Cal Poly, Team 17-3, Forte Spring 2015 Member of Cal Poly, Team 17-3, Forte Spring 2015

CPSU-FORTE-S15S17G3

4 Members

10 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview