1. Slide open the battery cover and remove the battery and the Memory Stick Duo. Return the battery cover to its closed position.
    • Slide open the battery cover and remove the battery and the Memory Stick Duo.

    • Return the battery cover to its closed position.

  2. Remove all three screws from the bottom of the camera.
    • Remove all three screws from the bottom of the camera.

  3. Remove the screws on the left and right sides of the camera. Remove the screws on the left and right sides of the camera.
    • Remove the screws on the left and right sides of the camera.

  4. Press down on the flash cover to raise the flash. Remove both screws that hold the flash cover to the body of the camera. Remove both screws that hold the flash cover to the body of the camera.
    • Press down on the flash cover to raise the flash.

    • Remove both screws that hold the flash cover to the body of the camera.

  5. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  6. Place the camera upside down with the battery port positioned upward.
    • Place the camera upside down with the battery port positioned upward.

    • Slide open the battery port.

  7. Pry the front cover of the camera off with the plastic opening tool. Pry the front cover of the camera off with the plastic opening tool. Pry the front cover of the camera off with the plastic opening tool.
    • Pry the front cover of the camera off with the plastic opening tool.

  8. Remove the power shutter unit.
    • Remove the power shutter unit.

  9. Unscrew the screw located at the back left corner of the flash component. Set the flash component aside.
    • Unscrew the screw located at the back left corner of the flash component.

    • Set the flash component aside.

  10. Remove the two screws from the bottom of the motherboard.
    • Remove the two screws from the bottom of the motherboard.

  11. Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.
    • Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.

  12. Flip the metal frame over to the left side of the camera and onto the surface on which you are working. Flip the metal frame over to the left side of the camera and onto the surface on which you are working.
    • Flip the metal frame over to the left side of the camera and onto the surface on which you are working.

  13. Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand. Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.
    • Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Rachel Payne

Member since: 02/23/2015

330 Reputation

2 Guides authored

Team

USF Tampa, Team 1-1, Leahy Winter 2015 Member of USF Tampa, Team 1-1, Leahy Winter 2015

USFT-LEAHY-W15S1G1

3 Members

5 Guides authored

One Comment

Thank you so much. I could successfully open the camera and got the LCD display out. But I couldn't find out how to replace the LCD, I wanted to mean where to open the LCD cable?

ummejamil - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 1,053