Fix Your Stuff Community Store

Sony Cyber-Shot DSC-TX9 LED Screen Replacement

Archived Guide
This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

Introduction

You will need a 001 screw driver and a pry stick for this repair.

What you need

  1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: step 1, image 1 of 3 Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: step 1, image 2 of 3 Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: step 1, image 3 of 3

    • Remove all screws on the outside of the camera. A total of 6 screws will be removed.

    • Use a 0001 screw. Note: That the first two screws are in the first circle.

    Edit

  2. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 2, image 1 of 3 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 2, image 2 of 3 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 2, image 3 of 3

    • Once all screws are removed slide open the battery cover.

    • Pop off the front plate of the camera by moving the two pieces away from each other.

    • The front plate will partially be attached to the body of the camera by a ribbon. Detach with caution.

    • Next, remove the two silver screws on the inside of the camera.

    Edit

  4. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 3, image 1 of 2 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 3, image 2 of 2

    • Pop off the back plate of the camera by gently pulling the inner plate out.

    • After the back plate is removed, the camera should appear like the second picture. The LED screen should be free and accessible to replace.

    Edit

  5. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 4, image 1 of 1
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use a pry stick to pop out the connector ribbon attached to the LCD screen.

    • A pair of tweezers may be needed to pull back a black slit to access the ribbon connector.

    Edit

  6. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: step 5, image 1 of 1

    • Attach the new LCD screen.

    • Follow the previous steps in reverse to put the camera back together.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 5 other contributors

Melissa Pavelka

Member since: 09/24/15

131 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

Texas Tech, Team 19-1, Rauch Fall 2015 Member of Texas Tech, Team 19-1, Rauch Fall 2015

TTU-RAUCH-F15S19G1

4 Members

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 384