Introduction

Use this guide if your remote stops functioning. Be sure to have a replacement battery available. The type of battery you will need is a 3 Volt CR2032.

Open battery tray by pushing right on the boxed tab and pulling the battery tray out. Open battery tray by pushing right on the boxed tab and pulling the battery tray out.
  • Open battery tray by pushing right on the boxed tab and pulling the battery tray out.

Open battery tray by pushing right on the boxed tab and pulling the tray out towards you.

Marlena Perez - Reply

Replace battery. When placing your new battery in the tray, make sure the positive side on the battery and the positive side on the tray are both facing up.
  • Replace battery.

  • When placing your new battery in the tray, make sure the positive side on the battery and the positive side on the tray are both facing up.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Marlena Perez

Member since: 04/14/2015

430 Reputation

3 Guides authored

Team

Cal Poly, Team 6-14, Maness Spring 2015 Member of Cal Poly, Team 6-14, Maness Spring 2015

CPSU-MANESS-S15S6G14

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 94