Introduction

This guide will demonstrate how to disconnect the antenna from the radio.

Parts

No parts required.

  1. Place the Phillips #2 screwdriver in the Phillips screw at the base of the antenna connection.
    • Place the Phillips #2 screwdriver in the Phillips screw at the base of the antenna connection.

    • Loosen and remove the 8 mm screw using the #2 Phillips screw driver.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna. Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna. Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna.
    • Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 814