Introduction

This is a brief guide that demonstrates how to remove the front panel from your Sony BDP-S3700.

Parts

No parts required.

  1. Use the PH1 screwdriver to remove the two 9mm screws on the back of the Blu-ray player. Use the PH1 screwdriver to remove the two 9mm screws on the back of the Blu-ray player.
    • Use the PH1 screwdriver to remove the two 9mm screws on the back of the Blu-ray player.

  2. Remove the back of the device by slowly sliding the rear outer housing backwards. Remove the back of the device by slowly sliding the rear outer housing backwards.
    • Remove the back of the device by slowly sliding the rear outer housing backwards.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Turn the Blu-ray over Pry open the clips under and on the sides
    • Turn the Blu-ray over

    • Pry open the clips under and on the sides

  5. Once all the clips are open, slide the front outer housing out.
    • Once all the clips are open, slide the front outer housing out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Luiz Barreto

Member since: 02/15/2017

609 Reputation

5 Guides authored

Team

USF Tampa, Team 12-1, Eyestone Spring 2017 Member of USF Tampa, Team 12-1, Eyestone Spring 2017

USFT-EYESTONE-S17S12G1

4 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 218