Introduction

We'll only replace the metal plate of the battery cover without having to replace the full cover.

By replacing only the metal plate, there's no need to disassemble the camera, which would void the warranty on the product.

Video Overview

  • As they do not sell the plate alone, it is necessary to buy the complete door, I did it on eBay.com

Add Comment

Since we received the spare part, we removed the plate from the new door, for this we put a very small flat screwdriver in the marked slot and pushed towards the side of the hinge.
  • Since we received the spare part, we removed the plate from the new door, for this we put a very small flat screwdriver in the marked slot and pushed towards the side of the hinge.

Add Comment

  • We take the pin (safe) of the new door and place it in the original door in the chamber.

Add Comment

  • We put the metal plate on the original door and ready.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Rodolfo Didier

Member since: 04/11/2018

1 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 14

Past 30 Days: 41

All Time: 98