Introduction

In the event that your eye cup is damaged or lost, you may need to replace it. This guide will show you how to replace it with a new one.

  1. Identify the bottom of the eye cup Using the heavy duty spudger, push the eye cup upward to remove it from the camera body. Using the heavy duty spudger, push the eye cup upward to remove it from the camera body.
    • Identify the bottom of the eye cup

    • Using the heavy duty spudger, push the eye cup upward to remove it from the camera body.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Flipping to the back side of the eye cup, unscrew the two JIS 000 screw from each side. Remove the back side of the eye cup. Remove the back side of the eye cup.
    • Flipping to the back side of the eye cup, unscrew the two JIS 000 screw from each side.

    • Remove the back side of the eye cup.

  4. Push down on the hard plastic part of the eye cup and remove it from the cushion. Push down on the hard plastic part of the eye cup and remove it from the cushion. Push down on the hard plastic part of the eye cup and remove it from the cushion.
    • Push down on the hard plastic part of the eye cup and remove it from the cushion.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Sydney Duncan

Member since: 10/10/2016

745 Reputation

5 Guides authored

Team

CJLADIES Member of CJLADIES

Community

1 Member

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 14

All Time: 408