Solio Rocsta Battery Replacement

Introduction

A batteries' cycle life will only last for so many charges. In time the battery may no longer hold a charge to power your device. In this guide, we will show you how to change the battery of the Solio Rocsta.

What you need

Step 1 Solio Rocsta Top Cover Disassembly

Solio Rocsta Battery Replacement, Solio Rocsta Top Cover Disassembly: step 1, image 1 of 2

Solio Rocsta Battery Replacement, Solio Rocsta Top Cover Disassembly: step 1, image 2 of 2

Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

Edit

Step 2

Remove top cover.
Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .

Edit

Step 3 Battery

Solio Rocsta Battery Replacement, Battery: step 3, image 1 of 1

Using the spudger, pry the battery off the back cover.

Edit

Step 4

Using a T6 Torx screwdriver, unscrew the 5.66 mm screws attaching the circuit board to the case and flip the circuit board.

Edit

Step 5

With the circuit board flipped, locate the battery connector.
Hold the component attached to the circuit board the battery is connected to and wiggle the cable out.

Edit