Smartab STJR700 Speakers Replacement

Introduction

This repair guide should only be used if all other options have been exhausted and the tablet's speakers still has no sound when in use. Before attempting to replace any of the speakers make sure the unresponsive speaker is not experiencing a software issue.

What you need

Step 1 Speakers

Smartab STJR700 Speakers Replacement, Speakers: step 1, image 1 of 3

Smartab STJR700 Speakers Replacement, Speakers: step 1, image 2 of 3

Smartab STJR700 Speakers Replacement, Speakers: step 1, image 3 of 3

Power off device. Place it face down. Unscrew the 4 perimeter screws, using a PH000 screwdriver from iFixit kit

Edit

Step 2

Using a plastic opening tool or metal spudger, begin to gently pry the rear case down and away from the display.Slowly wiggle the tool up and down to pry open the tablet.Once the rear case is fully removed place it to the side.

Edit

Step 3

Smartab STJR700 Speakers Replacement: step 3, image 3 of 3

Using tweezers carefully remove tape that is holding the black and red intertwined cables to the motherboard. Place tape to the side as is will be needed for reassembly.

Edit

Step 4

Remove the 2 screws holding the speaker to the front panel. Use a PH000 screwdriver from iFixit kit. Place the screws to the side as they will be needed for reassembly.

Edit