Use the screwdriver and the J10 tip to unscrew the back of the device. There are four screws; one on each corner. Use the screwdriver and the J10 tip to unscrew the back of the device. There are four screws; one on each corner.
  • Use the screwdriver and the J10 tip to unscrew the back of the device. There are four screws; one on each corner.

Add Comment

Deck the Halls
With tools and Fix Kits
Separate the pack of the device from the front panel exposing the digitizer along with the other electronic components.
  • Separate the pack of the device from the front panel exposing the digitizer along with the other electronic components.

Add Comment

Remove the circuit board from the front panel and screen, leaving the digitizer and circuit board intact. Separate the existing, damaged glass from the  front panel.
  • Remove the circuit board from the front panel and screen, leaving the digitizer and circuit board intact.

  • Separate the existing, damaged glass from the front panel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tianna Edwards

Member since: 03/22/2017

128 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 38

All Time: 249