Fix Your Stuff Community Store

Smart Parts Ion Hopper and the Air Tank Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Smart Parts Ion Hopper and the Air Tank Replacement, Hopper and the Air Tank: step 1, image 1 of 3 Smart Parts Ion Hopper and the Air Tank Replacement, Hopper and the Air Tank: step 1, image 2 of 3 Smart Parts Ion Hopper and the Air Tank Replacement, Hopper and the Air Tank: step 1, image 3 of 3

    • Remove the air tank by rotating it counterclockwise.

    • Do not pull the trigger or jostle the gun, there will still be pressurized air inside the gun that could be expelled and cause bodily harm if injected into eyes and/or skin.

    • The pressure gauge will indicate the leftover air in the gun.

    Edit

  3. Smart Parts Ion Hopper and the Air Tank Replacement: step 2, image 1 of 2 Smart Parts Ion Hopper and the Air Tank Replacement: step 2, image 2 of 2

    • Remove the hopper by pulling it out of the feed tube, located on the top of the body. The hopper should easily come off when pulled straight up.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Shane Villalpando

Member since: 02/02/15

1,031 Reputation

10 Guides authored

Badges: 10

+7 more badges

Team

Cal Poly, Team 8-42, Amido Winter 2015 Member of Cal Poly, Team 8-42, Amido Winter 2015

CPSU-AMIDO-W15S8G42

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 45